Shingleback 2B90 Vertical Bike Rack

Shingleback Lite Rack – 2B90

Product Description:

Australia’s favourite vertical bike rack just got even better!

The Shingleback LITE 2 Bike Rack is stronger, safer, easier to use, and more adaptable than the older style Classic. Shingleback vertical bike racks include cradle rotation/adjustment for a better fit between handlebars and feature a foot tilting mechanism to make it easier to tilt the rack for roll-on/roll-off loading – no over the shoulder lifting required.

Shingleback continues to make transport safe and easy for any mountain biker, gravel grinder, road biker or kids bike.

Like all Shingleback vertical bike racks, these are attached to your vehicle using a 50mm square towbar hitch and come with a 10-year warranty, backed by third-party independent Engineering Certification.

IMPORTANT: The 2B90 is not compatible with the Ski Clamp accessory.

*Shipping T&C’s Apply.

$1,330.00 inc GST

  • Tow bars vary depending on the vehicle, you will need to determine your tow bar capacity before choosing the right rack for you.
  • A swingarm reduces your bike rack’s download rating. Please check the rack specifications and disclaimer for more information.
  • Please note some vehicles have a shallow hitch (approximately 60mm) and may require a shorter tow bar tube and these are available to purchase under the Accessories tab. Please check the depth of your vehicle’s hitch.
  • Got a Landcruiser 200 or 300 series? Please make sure you also purchase the 200/300 series Anti-Rattle Clamp

What's in the box?

  • Shingleback 2B90 Rack

  • All nuts and bolts

  • Standard Tow Bar Tube
    [For hitch receivers with 80mm+ depth]

  • Shingleback 2B90 Rack

  • All nuts and bolts

  • Standard Tow Bar Tube

  • Numberplate Holder

  • Anti-rattle clamp

  • Numberplate holder

  • Anti-rattle clamp

Shingleback 2B90.

4 ways the Classic rack just got a whole lot better

Compare our product range

Features 2B90 LITE
Mountain bikes 24”- 29”
E Bike Compatible
Kids Bikes / BMX / (20"wheels)
Road / Gravel bikes
Winter gear (snowboard / Skis)
Multi-adjustable cradles (forward / back/ rotate left-right)
Maximum load (per cradle)
Maximum carrying capacity
Auto-latch tilt mechanism for roll on / off loading and rear vehicle access

^ Please refer to our Product Support page for more information 
* Dedicated Transport Accessories purchased separately

Features of the Shingleback 2B90

Multi-Adjustable Cradles

New cradle design that reduces movement, contacts mainly on the tread to reduce potential sidewall rub and hugs your wheel just right.

Highly adjustable cradle positions with rotation and front/back movement to give a better fit with wider handlebars. Cradles are positioned in a staggered fit to ensure maximum clearance can be achieved between bikes so brake levers are not rubbing between frames.

Carry ALL of the bikes

With our new cradle design and range of accessories you can safely carry every bike in your collection.

Bikes with wheels from 24" to 29" MTB, up to 4" wide fat tyres and most gravel bikes, will fit straight into the standard cradles.

With the addition of the 20" BMX insert or Roadie Insert  you can also carry kids 20" bikes, BMX and road bikes.

Foot Latch Mechanism

The all-new foot latch mechanism enables you to easily tilt the rack for roll-in loading without having to lift your bike overhead, making transport safer and easier for you.

The super simple latch design works smoothly and has built in redundancy with the safety pin which gives 100% peace of mind that the pivot or latch will never fail.

Modular vehicle mounting

With interchangeable tow bar tubes of different lengths,  and multiple hitch pin and rack mounting locations gives you the most flexibility when fitting the rack to your vehicle.

Auto-latching pivot

The all-new design features an auto-latching pivot so the rack ‘clicks’ into place for transport position. If you need more room to move you can also recline the rack all the way down to ground level for full access on vehicles with swing-open doors.

The full recline also creates a handy bike stand while at your destination.


Built tough, 100% Aussie

Shingleback Off Road is a family-owned business. All our products are designed and made in North East Victoria.

A rack you can trust

We’re so confident in the workmanship of our Shingleback racks that we’re prepared to guarantee them for 10 years

Engineering Certification

The only vertical bike rack company in Australia to have third party engineering certification. Shingleback racks are tested to ensure product longevity, QA compliance and safety.

Need More Load Capacity?

The all-new LITE is available in 3 – 6 bike configurations.