$1,190.00 – $1,590.00 inc GST
Got a ute with a canopy/service body? The Shingleback Canopy Bike Rack is a simple solid solution that not only securely carries your bikes it also leaves the tow bar free for towing*. The bikes are carried a lot closer to the vehicle which improves the departure angle and reduces rear overhang.
The Canopy Bike Rack uses the same innovative best in class Cradles that are used on the rest of the Shingleback racks which are rated to 35kg each, are multi adjustable, accept BMX and Roadie accessories, and really are much safer for your bike.
While the Canopy rack is awesome please be aware that depending on the height of your canopy and vehicle it may be a challenge for shorter people to reach while loading/unloading bikes.
The kit consists of the top bar with cradles, bottom bar, and the new canopy mount brackets which are a universal solution to help custom fit the top bar to your canopy. As canopies vary and everyone has a different set up, it is your responsibility to ensure that your vehicle, canopy, mounting system are suitable and that you comply with any local rules and regulations including making sure your number plate is visible. Please note the kit does not include a number plate board but they are available separately if needed.
We recommend using a skilled fabricator to ensure the Shingleback Canopy Bike Rack is properly installed and securely affixed. See warning & disclaimer below.
Whilst it is possible to use the Shingleback Canopy Bike Rack in conjunction with your existing Roof Racks, Roof Top Tent, Awnings, solar panels etc, these items may also need to be adjusted, moved or removed to allow clearance for the bike rack.
*If you plan to also tow a trailer/caravan/camper trailer when transporting bikes it is up to you to ensure that you don’t exceed your vehicle’s GVM or GCM or down load rating and the drawer bar is long enough to ensure clearance.
Width (unloaded)
3 bike rack: 810mm
4 bike: 1100mm
5 bike: 1380mm
6 bike: 1680mm
Maximum load (per cradle)
All sizes: 35kg
Maximum carrying capacity (whole rack)
3-6 bike: 105kg
For full specifications and fitting variations, please see our Rack Specifications page >
Manufactured in Australia since 2016 using Australian made Duragal Steel and featuring a tough textured black powdercoat finish, you can be assured they are built to last.
The Shingleback bungee is Australian Made, marine grade and UV resistant bungee cord that is doubled over for extra strength.
Free shipping applies to all orders within Australia of racks, accessories and spare parts listed on our website.
We aim to dispatch your order within 5 to 7 business days of the order and payment being received. This can vary during peak seasons, however we will always strive to dispatch your order as quickly as possible.
All orders within Australia will be delivered by Direct Freight (excluding small items which are sent via Australia Post). Once your shipment is collected by Direct Freight, Shingleback Off Road can not control delivery times, however we will provide you with a tracking number for your shipment so you can monitor delivery progress and stay informed. Once you receive the tracking number we encourage you to log on to the Direct Freight website and track your order. We will support you in the unlikely occurrence of your parcel not being delivered.
PATENTED AU 2021345499 B2. All our products are custom-made and exclusive to Shingleback Off Road.
Shingleback assumes no responsibility whatsoever in relation to how the Canopy Rack is mounted to your vehicle. As there are many canopies available on the market, it is not possible for Shingleback to guarantee that the Canopy Rack can be safely attached to your canopy. Therefore, to the extent permitted by law, Shingleback assumes no liability for any loss or damage whatsoever or howsoever caused arising directly or indirectly in connection with the attachment or mounting of the Canopy Rack to your vehicle. The paragraphs below provide information in relation to mounting the Canopy Rack, but this guide is for general information purposes only. The guide should not be relied upon to determine whether your vehicle’s canopy is suitable and provides no express or implied guarantee. Any reliance you place on such information is therefore strictly at your own risk.
Shingleback strongly encourages you to seek assistance from a suitably qualified person to mount the Canopy Rack on your vehicle.
Further, Shingleback does not guarantee that the Canopy Rack will be roadworthy once mounted to your vehicle. You will need to check your local road rules in this regard.
New cradle design that reduces movement, contacts mainly on the tread to reduce potential sidewall rub and hugs your wheel just right. Highly adjustable cradle positions with rotation and front/back movement to give a better fit with wider handlebars. Cradles are positioned in a staggered fit to ensure maximum clearance can be achieved between bikes so brake levers are not rubbing between frames.
With our new cradle design and range of accessories you can safely carry every bike in your collection. Bikes with wheels from 24" to 29" MTB, up to 4" wide fat tyres and most gravel bikes, will fit straight into the standard cradles. With the addition of the 20" BMX insert or Roadie Insert you can also carry kids 20" bikes, BMX and road bikes.
The canopy rack sits high to minimise impact on your vehicle departure angle when compared to a standard Shingleback Vertical Bike rack mounted to the towbar.
Maintain towing with your vehicle, whether its your trailer for weekdays or caravan on the holidays, the Shingleback Canopy Rack gives you the ability to continue towing and use existing roof mounted accessories such as awnings, roof top tents and roof boxes.
We’ve used corrosion-resistant, higher-tensile Duragal steel for optimum strength and reliability for carrying any bikes up to heavy ebikes.
When driving off road is it suggested to use the Pedal strap option for added bike stability on the rack. When adding the pedal strap option your bike may be damaged when exiting steep departure angles.
Shingleback Off Road is a family-owned business. All our products are designed and made in North East Victoria.
We’re so confident in the workmanship of our Shingleback racks that we’re prepared to guarantee them for 10 years.
The only vertical bike rack company in Australia to have third party engineering certification. Shingleback racks are tested to ensure product longevity, QA compliance and safety.
Shingleback assumes no responsibility whatsoever in relation to how the Canopy Rack is mounted to your vehicle. As there are many canopies available on the market, it is not possible for Shingleback to guarantee that the Canopy Rack can be safely attached to your canopy. Therefore, to the extent permitted by law, Shingleback assumes no liability for any loss or damage whatsoever or howsoever caused arising directly or indirectly in connection with the attachment or mounting of the Canopy Rack to your vehicle. The paragraphs below provide information in relation to mounting the Canopy Rack, but this guide is for general information purposes only. The guide should not be relied upon to determine whether your vehicle’s canopy is suitable and provides no express or implied guarantee. Any reliance you place on such information is therefore strictly at your own risk.
Shingleback strongly encourages you to seek assistance from a suitably qualified person to mount the Canopy Rack on your vehicle.
Further, Shingleback does not guarantee that the Canopy Rack will be roadworthy once mounted to your vehicle. You will need to check your local road rules in this regard.
© SHINGLEBACK OFF ROAD 2022
ABN: 28 633 831 393